The xLC unit triples the service life of the Nemo progressing cavity pumps from Netzsch, particularly when conveying difficult, abrasive media. When wear occurs in the rotor-stator system, this unit allows the performance of the pump to be re-established by adjusting the preload between the conveyor elements.
It is important for the xLC stator adjustment system that the elastomer in the rigid metal sleeve of the stator is flexible, which was made possible with the development of the iFD stator 2.0. The xLC adjustment system uses this characteristic so that the elastomer is not vulcanised into the housing but rather fixed through axial pressing. To regulate the preload in the rotor-stator system, the elastomer in the sheath is extended by pulling or shortened by pressing, which changes the preload between the pumping elements. In case of wear, compressing the elastomer increases the preload and re-establishes the reduced sealing line. If the stator has to be adjusted due to declining performance of the pump, the setting nuts of the system are adjusted, compressing the elastomer insert in the metal housing once again.
Online search: cppPC218netzsch